3D Background Thin Rock 97x45cm to fit Aqua Oak 110 Aquarium
- The background will fit Aqua Oak 110 aquarium model
- Perfect for narrow tanks, wall aquariums and any other fish tanks, where space is limited. It has a rocky structure, but not deep. The background doesn't fit flush on the back.
If you are based in the USA please visit our partner's website for $$ prices and shipping from the New York based warehouse
This 3D background comes in 2 sections and will fit Aqua Oak 110 aquarium.
Aqua Maniac's Backgrounds are made from poly-resin, which is safe for all aquatic life. Our backgrounds sink, it's not a foam, so you don't have to use silicone to fix them inside your tank. The background is not flexible, you can't bend it, but you may trim it by using angled grinder, hacksaw, dremmel.
Installation is very easy, you only have to slide it inside your aquarium.
The background thickness is around 1-2cm
There is a foam fixed on the sides of the background, which will fill the gap between the glass and the background. The foam is around 2cm width, so fish will not swim behind the background.
The rear is shaped like the front, it ranges up to 1 inch at its widest point this being 3d and not a flat background. If you decide to install a thin rock background in your tank, you won't be able to hide your filter pipes behind it.
Thin rock background is suitable for reptiles and can be fixed inside vivariums, terrariums etc.
We can do any size of background with drilled vents in desired placed. For custom built background please contact us or visit www.backgroundquote.co.uk
PLEASE NOTE: the main picture is only a sample image of this product. The item which You will receive may not be identical to the picture. Colour may vary, can be slightly lighter or darker. It's a hand-painted background and every item is unique.
This item will be produced in our factory based in Poland. Shipping will take longer due to the import procedure.
All import fees are included in the price you pay.
| Size | will fit aquarium | will fit aquarium size inches |
|---|---|---|
| 97x45cm | 100x50cm |
How to measure your aquarium before ordering a 3D background?
Measure your aquarium inside, not outside. Get a measure tape and measure your tank inside from corner to corner, and from bottom up to the top edge of tank. If you have a support brace across your aquarium measure from bottom up to the brace bar. The background has to fit under the brace. Please bear in mind that our backgrounds are not flexible, so you can't bend them.
Leave 1 cm gap between the glass and the background, decrease background width by total of 2 cm and height by 2 cm, so you will have enough room to fit the background inside your tank. On the side edges of the background we fix a greyish foam which will fill the gap between the background and the glass.
