📨 in**@*********ac.com

🌎 Made to Measure 3D backgrounds – get quote in 3 seconds

Browse

Want to chat?

Social

Exo Terra background size guide

Find the right 3D background for your Exo Terra terrarium

Choose a hard-wearing, hand-finished poly-resin background made by Aqua Maniac for popular Exo Terra vivarium sizes. Select your model below and arrive at the product page with the correct size already chosen.

Aqua Maniac Amazon Design poly-resin 3D background for Exo Terra terrariums
Made for 17 Exo Terra modelsChoose by the model name and full vivarium dimensions.
Tough poly-resin constructionHard to scratch, water-resistant and heat-resistant.
Neat flat-backed installationFit with suitable silicone and seal the perimeter.
Customer leopard gecko terrarium with Aqua Maniac Thin Beige Rock 3D background

A stronger alternative to exposed foam

A realistic rock wall built for everyday terrarium life

The standard foam insert can mark, chip or expose its core over time. Aqua Maniac uses poly-resin to create a more substantial decorative wall with crisp rock, root and stone detail.

  • Hard to scratch under normal terrarium use
  • Water-resistant and heat-resistant material
  • Textured relief adds natural-looking depth and grip
  • Handcrafted and hand-painted in small batches
  • Suitable for tropical, woodland and arid visual themes

Compare the three Aqua Maniac Exo Terra background designs.

Choose the depth and finish that suits your setup

All three designs use tough poly-resin, but they create different visual weight and use different amounts of internal space.

Amazon Design

A deep brown root-and-rock relief, approximately 4–6 cm thick, for a dramatic forest-floor appearance.

Shop Amazon Design backgrounds

Thin Grey Rock

The same space-saving profile in grey, approximately 2 cm thick, for cooler-toned rock and planted layouts.

Shop Thin Grey Rock backgrounds

Thin Beige Rock 3D background fitted in a long terrariumClose-up texture of Aqua Maniac Amazon Design poly-resin background

Exo Terra background size chart

Match the model name and all three vivarium measurements before ordering. The background panel covers the rear wall, so its listed panel size is width × height rather than the full enclosure footprint.

Exo Terra model Vivarium size (W × D × H) Background panel (W × H) Preselect size
Mini Wide 30 × 30 × 30 cm 30 × 30 cm Choose Mini Wide background
Mini Tall 30 × 30 × 45 cm 30 × 45 cm Choose Mini Tall background
Small Wide 45 × 45 × 45 cm 45 × 45 cm Choose Small Wide background
Small Tall 45 × 45 × 60 cm 45 × 60 cm Choose Small Tall background
Medium Wide 60 × 45 × 45 cm 60 × 45 cm Choose Medium Wide background
Medium Tall 60 × 45 × 60 cm 60 × 60 cm Choose Medium Tall background
Large Wide 90 × 45 × 45 cm 90 × 45 cm Choose Large Wide background
Large Tall 90 × 45 × 60 cm 90 × 60 cm Choose Large Tall background
Large X-Tall 90 × 45 × 90 cm 90 × 90 cm Choose Large X-Tall background

Straightforward installation

Flat at the back, detailed at the front

The rear of each panel sits flat against the terrarium glass. Dry-fit first, then use silicone suitable for terrarium use and seal the edges carefully. A properly fitted perimeter prevents crickets and other feeder insects from finding an open route behind the background.

Choose the slim 2 cm rock designs where internal space matters most, or the deeper Amazon Design when pronounced relief is the priority.

Order a fitted background for your Exo Terra model.

Flat rear surface of Aqua Maniac Thin Beige Rock terrarium background

Exo Terra 3D background FAQs

Are these backgrounds made by Exo Terra?

No. They are designed and made by Aqua Maniac to fit the listed Exo Terra terrarium models. Aqua Maniac is independent and is not affiliated with Exo Terra.

How are Aqua Maniac backgrounds different from the original foam insert?

Aqua Maniac backgrounds are made from hard poly-resin rather than exposed polystyrene foam. They are hard to scratch, water-resistant and heat-resistant, with a detailed hand-finished surface.

Can crickets hide behind the background?

The panel has a flat back. When it is fitted against the rear glass and the perimeter is properly sealed with suitable silicone, there is no open cavity behind it for feeder insects to enter.

Which design saves the most space inside the terrarium?

Thin Beige Rock and Thin Grey Rock are approximately 2 cm deep, so they preserve more usable enclosure space. Amazon Design has deeper relief of approximately 4–6 cm for a more dramatic root-and-rock effect.

How do I install a 3D terrarium background?

Dry-fit the panel first, clean and dry the glass, then bond and seal the flat rear face with a silicone suitable for terrarium use. Allow it to cure fully according to the silicone manufacturer’s instructions before adding animals.

Can I use one with a bearded dragon, gecko, snake or frog?

The background is a decorative enclosure component used in many reptile and amphibian setups. Always plan heat, humidity, ventilation and furnishings around the needs of your particular species.

What if my enclosure is not one of the listed Exo Terra sizes?

Use Aqua Maniac’s made-to-measure service for a background produced for your enclosure dimensions rather than ordering the nearest standard size.

Ready to transform the rear wall of your terrarium?

Select your exact Exo Terra model, compare the available finishes and order the background designed for that size.

Need more options? Browse all 3D backgrounds for vivariums. Exo Terra is a trademark of its respective owner. Aqua Maniac is an independent manufacturer and is not affiliated with or endorsed by Exo Terra.

Lead Time

depending on the background size it's 5-14 days

Product Samples

We offer 3D background samples - get in touch

Easy Payments

PayPal / MasterCard / Visa / Pay Later